#Timetool exe update
#Timetool exe driver
#Timetool exe manual

With this card, Intel supply a device driver named CLOCK.SYS Technical info - I/O port usage ( info source: Maelgrum at the VCFF)

#Timetool exe update

With this method, everything is automatic - using the date and time commands of DOS will automatically update the date/time on the Hyper-Port card. With this card, Hypertec supply a device driver named CLOCK.SYS Sourced from the Simtel MS-DOS Collection.Īdditional information about the software ( info source: Maelgrum at the VCFF) Note: If you have Sergey's XT-CF-Lite board, and it is configured for I/O port 300h (the default), see post #15 at here. EV-170A and EV-170B have no clock circuitry.Ī replacement for many PC and XT clock programs. The EV-170A and EV-170B are not the same as the EV-170. Software may also suit certain other DTK cards. No particular DTK card specified, however, the software was found to work for DTK's PII-125 card. One of the versions of TIMER.COM below, in the PC TIMER section, is expected to work.ĭTKCLK11.ZIP software sourced from the Simtel MS-DOS Collection.

Post #7 at here indicates that DFI's SETCLOCK.COM and GETCLOCK.COM (see above) will work. Looking for _8167 class chip, 32 I/O ports, at base port of 2C0 ( info source: Maelgrum at the VCFF)

HXPCLOCK.COM ( source: el_VR at the VCFF)

#Timetool exe manual

User's Manual (includes usage information for SETCLOCK.COM and GETCLOCK.COM)

Looking for _8167 class chip, 32 I/O ports, at base port of either 2C0 or 340 ( info source: Maelgrum at the VCFF) MM58167A chip, using I/O ports of range 2C0 - 2DF ( source: page 2-2 of user's manual) ?) ( Diamond Flower Electric Instrument Co, Inc.) With this method, everything is automatic - using the date and time commands of DOS will automatically update the date/time in the CompuAdd 810's real-time-clock.ĭFI (Diamond Flower Inc. With this card, CompuAdd supply a device driver named CLOCK.SYSĬLOCK.SYS is put onto the hard drive and a reference is made to it in CONFIG.SYS so that it is loaded in memory each time that the computer is powered on. Shows date and time format information.ĬADDCLCK.ZIP ( source: vwestlife at the VCFF) Set DOS' clock from the card's clock (RTC). Show the date and time in the card's clock (RTC). Per here, use once to set the card's clock (RTC). MFC-384i 8 PLUS - Support software.zip ( source: chris_nh at the VCFF) Known to work on the Boca Research card shown at here (RTC chip is a RTC-58321)ĬC&C (California Computer and Component, Inc.) See entry for Olivetti M24.ĪTD-20 clock module on ATD T512CLK-A1.zip ( source: natevw at the VCFF) The PC6300 computer is essentially a rebadged Olivetti M24. Technical info - I/O port usage of clock chips on AST cards Looking for _8167 class chip, 16 I/O ports, at base port of either 2C0 or 2A0 or 280 ( info source: Maelgrum at the VCFF)ĪSTCLOCK.COM and SETCLOCK.COM (1982) (no version found - possibly version 1.00)ĪSTCLOCK.COM (version 1.10, 1984) (from SuperPak version 4.2)ĪSTCLOCK.COM (version 1.20, 1985) (from SuperPak version 5.02)ĪSTCLOCK.COM (version 1.21, 1985) (includes usage information) (from SuperPak version 6.11, dated 1988)ĪST SixPakPlus - Move to new type of clock chip (requires ASTCLOCK.COM from SuperPak version 4.3, or later)

Found on a 180K floppy, suggesting that the TK-200 card is early PC.ĭisplays 'CLOCK V2.1A IMPERIAL INT'L CO.

TEKCLOCK.BAT is used to set DOS' date/time into the card.

TEKCLOCK.ZIP ( source: Chuck(G) at the VCFF)